This Is How You Make Your Own Flamethrower!

This particular flame thrower is made to fit in a normal backpack, keeping your arms and hands free for throwing flames while using it!

With an air compressor, a diesel nozzle, a fuel tank, some hose, and some fittings, you’ll have a flame thrower capable of running off of tiki torch fuel.

Here we have the step by step instructions, but you can find the full video instructions at the bottom of this post.

Step One:

Start with an air compressor. You’ll want to remove the regulator, and fill in the space left behind with a brass plug.



Step Two:

Tap a hole in the bottom of the compressor to add fittings.


Step Three:

Your fittings should look like this with the correct valves.



Step Four:

Run a host from the valve and fit the end with an internal check valve.



Step Five:

Connect the internal check valve to a diesel nozzle.



Step Six:

Remove the spout and add a pipe running down to a tip and hose as pictured. The tip and hose will run the fuel for your flame.



Step Seven:

Run a hose with a nozzle to a fuel tank tapped with a valve and fitting like this. Fill up your tank with tiki torch fuel. Add valve along the hose to better regulate your fuel.


Step Eight:

Spark up and start throwing flames! You can adjust with the nozzles on the hose. The whole rigging will fit neatly into a backpack.

Leave a Reply

Your email address will not be published. Required fields are marked *